17,603 research outputs found

    A sterilizable high-impact antenna

    Get PDF
    Rectangular cup antenna withstands indirect impacts up to 10,000g and direct impacts up to 250 ft/sec of impact velocity and provides radiation of selected polarization and beam shape. It has high radiating efficiency, and relatively broad bandwidth

    Circularly-polarized multiband telemetry tracking antenna

    Get PDF
    Utilize coaxial horn feed to illuminate reflector; feed has inner horn for X-band, and outer horn for S-band. Tracking error signals for servo correction are derived from measurements of relative phase and relative amplitude between two modes

    Design, modeling, and analysis of multi-channel demultiplexer/demodulator

    Get PDF
    Traditionally, satellites have performed the function of a simple repeater. Newer data distribution satellite architectures, however, require demodulation of many frequency division multiplexed uplink channels by a single demultiplexer/demodulator unit, baseband processing and routing of individual voice/data circuits, and remodulation into time division multiplexed (TDM) downlink carriers. The TRW MCDD (Multichannel Demultiplexer/Multirate Demodulator) operates on a 37.4 MHz composite input signal. Individual channel data rates are either 64 Kbps or 2.048 Mbps. The wideband demultiplexer divides the input signal into 1.44 MHz segments containing either a single 2.048 Mbps channel or thirty two 64 Kbps channels. In the latter case, the narrowband demultiplexer further divides the single 1.44 MHz wideband channel into thirty two 45 KHz narrowband channels. With this approach the time domain Fast Fourier Transformation (FFT) channelizer processing capacity is matched well to the bandwidth and number of channels to be demultiplexed. By using a multirate demodulator fewer demodulators are required while achieving greater flexibility. Each demodulator can process a wideband channel or thirty two narrowband channels. Either all wideband channels, a mixture of wideband and narrowband channels, or all narrowband channels can be demodulated. The multirate demodulator approach also has lower nonrecurring costs since only one design and development effort is needed. TRW has developed a proof of concept (POC) model which fully demonstrates the signal processing fuctions of MCDD. It is capable of processing either three 2.048 Mbps channels or two 2.048 Mbps channels and thirty two 64 Kbps channels. An overview of important MCDD system engineering issues is presented as well as discussion on some of the Block Oriented System Simulation analyses performed for design verification and selection of operational parameters of the POC model. Systems engineering analysis of the POC model confirmed that the MCDD concepts are not only achievable but also balance the joint goals of minimizing on-board complexity and cost of ground equipment, while retaining the flexibility needed to meet a wide range of system requirements

    XMM-Newton Observations of NGC 507: Super-solar Metal Abundances in the Hot ISM

    Full text link
    We present the results of the X-ray XMM-Newton observations of NGC 507, a dominant elliptical galaxy in a small group of galaxies, and report 'super-solar' metal abundances of both Fe and a-elements in the hot ISM of this galaxy. We find Z_Fe = 2-3 times solar inside the D25 ellipse of NGC 507. This is the highest Z_Fe reported so far for the hot halo of an elliptical galaxy; this high Iron abundance is fully consistent with the predictions of stellar evolution models, which include the yield of both type II and Ia supernovae. The spatially resolved, high quality XMM spectra provide enough statistics to formally require at least three emission components: two soft thermal components indicating a range of temperatures in the hot ISM, plus a harder component, consistent with the integrated output of low mass X-ray binaries (LMXBs). The abundance of a-elements (most accurately determined by Si) is also found to be super-solar. The a-elements to Fe abundance ratio is close to the solar ratio, suggesting that ~70% of the Iron mass in the hot ISM was originated from SNe Type Ia. The a-element to Fe abundance ratio remains constant out to at least 100 kpc, indicating that SNe Type II and Ia ejecta are well mixed in a scale much larger than the extent of the stellar body.Comment: 29 pages, 6 figures, Accepted in ApJ (v613, Oct. 1, 2004); Minor revisions after referee's comments; A high-resolution pdf file available at http://hea-www.harvard.edu/~kim/pap/N507_XMM.pd
    corecore